Home

Windows 98 boot disk format command

My Retro and Vintage Computing Blog: How To

In Windows 95, 98, or Me, how do I partition and format a

FORMAT A: /S Follow on-screen messages until process is complete. Windows 95/98/ME Click the Start button and click Settings, Control Panel From the Control Panel screen, click Add/Remove Programs In the Add/Remove Programs screen, click the Startup Disk ta Boot from Win 98 boot floppy, assuming you have already partitioned and formatted the HDD, just before the A:\> prompt your CD drive letter should be listed, mine was E. type in E: after the A prompt and you should get this prompt, E:\> then type dir and this will open you CD directory If you have any UNTOUCHED OEM boot disks with different drivers, please submit them. Available releases 95 RTM 95 OSR2.x 98 FE 98 SE ME Release notes Boots using MS-DOS 7.1 This also works with 95 OSR2.x and 98FE. You can also use it with 95 RTM if you don't use FAT32, and tell scandisk to continue after it gives an error

File Info: win98boot.zip. This is a zip file that contains all of the system files that you will need for making a bootable USB disk. Extract all these files into a temporary folder. Then when you run the HP USB Format Utility select the directory for your bootable files. File Download: win98boot.zip. EXTREME Overclocking provides files for. Click on a command to receive more information about it. [INFO] [DIR] [CD] [COPY] [DEL] [XCOPY] [DELTREE] [MOVE] [REN] [MKDIR] [RMDIR] [ATTRIB] [PING] [TRACERT] Important Information Note: Some of these commands can cause damage to your system if used improperly. Please use with caution To format your PC and reinstall windows 98 you need to do the following: 1. Make sure that you have the start up disk that came along with your operating system CD. You can also make a start up disk by going to the Control Panel> Add/Remove Programs> Create Start up Disk, click on the button and insert a floppy in your floppy drive. 2

To create a Windows 98 boot diskette, click Start, Settings, Control Panel, double-click the Add Remove program's icon, click the startup disk and create the disk. Alternatively, to create a Windows 98 boot diskette manually from Windows, click Start, Shutdown, and choose the option to restart the computer in an MS-DOS prompt. At the prompt. Assuming that you're already running Windows™ 95 or 98, the method shown here to create a new boot disk will begin by using the My Computer shortcut icon on your Desktop: [ NOTE: There's a special tab in the Add/Remove Programs section of Control Panel which creates what Microsoft calls a Startup Disk

If the troubled machine is running Windows 98 SE, then you must use a machine that's also running Windows 98 SE to create the disk. On the good machine, insert a blank, formatted diskette into the.. title Win98SE Install (ISO+FD IMG)\n Choose non-CDROM option 2\n Run FDISK to partition the HDD\n Then reboot and run Format.\n Change to drive B: and type Setup set ISO= (bd)/_ISO/MAINMENU/Win98/ Win98se.iso map /_ISO/MAINMENU/Win98/ Windows98_se.img (fd0) map %ISO% (0xff

Open the ToolsMtsutilFat32ebd folder on the Windows 98 CD-ROM. Double-click the Fat32ebd.exe file and then follow the instructions to create the startup disk. Label and write protect the floppy disk. Method 2: Click Start, point to Settings, and then click Control Panel. Double-click Add/Remove Programs. On the Startup Disk tab, click Create Disk the BIOS. You can create the disk using Windows 98/Me by typing format. a:/s from the command prompt. Once you've created the MS-DOS boot disk, you can copy your BIOS files to it. using someone.

Under File System Select 'Fat' or 'Fat32' Type a name for the Volume Label if you'd like Place a check in the Create a DOS startup disk Click the box labeled and navigate to the win98boot directory you extracted earlier. Click Start Follow the prompts Safely remove your USB drive Your USB drive is now bootable In Command Prompt window, input diskpart and hit Enter key. Then, type the following commands in order and hit Enter after each one. list disk select disk m, m refers to the number of your disk that will be formatted clean create partition primar #=2 No MS-DOS-based program check, Windows-based programs are blocked. #=3 No Windows-based or MS-DOS-based program check. /ND This switch ignores the presence of a Migration.dll file and is used to force Windows 98 to overwrite newer files. Note: Files that use the ,32 flag in the .inf file still force Windows 98 Setup to keep the newer. Format the hard disk, using FORMAT C:/S This not only formats the hard disk, but puts a system on it so it can be booted. I have been told that I should say here DON'T REBOOT YOUR SYSTEM YET! Step 3: Copy the installation files Go to drive C:, and create a directory called C:\WINDOWS\OPTIONS\CABS. nested directories At the prompt, if you have MS-DOS 6.2, Windows 3.x, Windows 95, Windows 98, type: FORMAT A:/S If you have MS-DOS 5.0 Type using double density 5.25 diskettes type: FORMAT A: /360 /S If you have MS-DOS 3.11 through 4.0 using double density 5.25 diskettes, type: FORMAT A: /4 /

In Windows 98, how do I use Fdisk to create a single FAT32

WINDOWS AND DOS BOOT DISKS DOS/Windows9X/Me/NT/2K/XP Excellent Bootdisks Windows XP Fresh Install Bootdisk And Bootable CD Driver Free Disk For BIOS Flashing 1 | 2 | 3 | About _____ DRIVERS NoDevice DriversLIB GiveMeFile.Net DLLS DLL Archive DLL Lab DLL Dump DLL Files BOOTABLE CDS To Read/Write/Copy/Delete/Edit Files On NTFS Drive Start windows 95 or 98/98se from Command Line (dos) - posted in Windows 98™, 95, ME: Alrighty. Howdy Now, i recently aquired an ancient artifact! (AKA the Compaq Armada 1700 Lappy) Its specs are as follows: CPU: Pentium II 233MHZ RAM: 32MB HDD: 4GB Has a CD-ROM drive, but i cant get into the bios to change the booting order. I can only boot of the Inbuilt Floppy Drive

windows 98 format c Win98 Installation Drive Formatin

Download the file to your C: drive, put a fresh disk in your A: drive, then click on the file to create the bootdisk. 2. The W2K Pro disks are zipped images from the MS CD. Best bet is to download them, upzip them to a new folder where you also put makeboot.exe and makebt32.exe into and then run one of the makeboot utils depending on if you're. Once you've made partition changes, restart the system and boot from the Windows 98 floppy again: Step 6 - Format thin client internal hard disk. Back at the DOS prompt. Before we install Windows 98, we need to format the internal hard disk. Type format c: and then Y to start the format process

Customize the Windows 98 boot process by editing the MSDOS

Apart from my Internet-capable Windows 7 machine, there is one other machine I keep set up and work ready. This is a dual-boot Celeron Windows 98/Windows XP machine which I use for floppy file recovery, disk imaging and writing 5.25 inch floppy disks in various formats for use in a number of vintage machines First make a Startup Disk (Boot Disk): To create a Startup Disk, click the Add/Remove Programs icon in Windows Me/98 Control Panel. WebTechGeek.com The Steps for Formatting The C Drive in DOS: 1. If you installed a new C drive and you need to formatting the C drive, you need to boot-up from a boot floppy disk and use DOS to format the C drive How do I format a Windows 98 hard drive? When you arrive at the DOS prompt, you can use the format command to format your hard disk drives. At the A:\ prompt, type Format X: (where X: is the drive you want to format), and press Enter

Running Windows 98 on AndroidWindows 7 - MS-DOS Bootable Flash Drive - Create - Daniel

The format command creates a new root directory and file system for the disk. It can also check for bad areas on the disk, and it can delete all data on the disk. To be able to use a new disk, you must first use this command to format the disk. After formatting a floppy disk, format displays the following message After booting with the diskette and at the A> prompt, try format c: ENTER key If this returns a bad command message, the format file on your boot disk is faulty. Get a new copy of the boot disk. If the format command works, use it and don't worry about the /u/s After formatting and installing Windows, the DOS system files wil Windows 95/98 Fdisk/X this switch ignores Extended disk access support Fdisk/status this command shows you the status of your hard drive Fdisk/actok this command prevents fdisk from checking the integrity of the hard drive speeds up the process if this command is used. Fdisk/mbr this command is used to rewrite the master boot record Fdisk/cmbr. NOTE: The Windows 98 Startup disk provides support for most types of CD-ROM drives, including IDE and SCSI CD-ROM drives, but it may not support your particular CD-ROM drive. A Windows 98 Startup disk is required to perform the steps in the following sections of this article. If you do not have one, you can create one using any Windows 98-based.

use a windows 98 bootable floppy or cd ( you may have to change boot order in the bios to have it boot first off that device and not the hard drive c) at the command prompt type c: format ignore the warnings if you want to format the drive you can also fdisk the drive at the command prompt type fdis This disk is used to start Windows 98 command prompt. It helps to resolve or format issues within Windows 98. All you have to do to use it, is insert it in your floppy disk, reboot to your BIOS.

2. I booted up the netbook with a MS-DOS bootable disk (from Win 98), then I run fdisk command and there was no such primary partition that I created in step 1 and when I tried to create a primary partition to this disk, there was only 2.055GB shown as available disk space. 3 Note that Win98 will make the first hard disk partition Active and MS-DOS bootable. Therefore the first internal hard disk will be modified by this process even if you install Win98 to a different hard disk or partition! 2. If you see a message to boot from the Hard Disk or CD-ROM, choose the 'Boot from CD-ROM' option Used to format a 3.5 inch disk with the number of tracks specified using this option. For both 720 K-byte disks and 1.44 K-byte disks, this value should be entered as T:80. /B - Formats a disk reserving room on the disk to later copy the DOS system files. /S - Copies the operating system files to the disk after formatting The Unattended and Updated Boot CD for Windows 98 has evolved into the. Windows 98 Seven Years Later ed. Boot CD project:. Change Log: version 2.5 released on August 14, 2005: - major modification to boot image file: now skips unnecessary stage (that contains a duplicate boot from CD or Hard drive choice), EBD.CAB and EBD.SYS have been removed to save space, Symantec's GDISK added, Config. The command.com file for Win 95/98/98SE should be the same for each OS. Just boot to a Windows 98 boot disk, start it without cd-rom support, and type sys c: at the command prompt. Here is the.

The following outlines creating a bootable startup disk with real-mode CD-ROM support, a must have item when performing a clean install of Windows 98. This is a DIY alternative to using the CDBoot utility provided here on this website. Creating a DOS boot disk (A) Via a command prompt in DOS. Insert a blank 3.5 floppy disk Windows 98 Upgrade CD with Product ID number Boot disk with real-mode DOS CD-ROM support Windows 95 Companion CD or alternate (see 5 below) 1- Create a boot disk with real-mode CD-ROM support The first thing you will need is a boot disk containing a real-mode CD-ROM driver for use in MS-DOS. Without such a disk you will not be able to access. Click on Command Prompt from the System Recovery Options screen. At the prompt, type format C: /fs:NTFS /p:2. The format command used in this way will format the C drive with the NTFS file system and write zeros to every sector of the drive. Be sure to set the drive letter of the drive you wish to zero out

Format 98 - Windows 95/98/M

I was recently asked how to install Windows 98 without using a boot floppy. In this video I show you how to do just that on the Dell Inspiron 410 Windows 98 startup disk has some useful utilities and can be used to repair Windows 98 without any additional drives. A floppy which was created by format A s, just have loader, and couple system. For a standalone installation of MS-DOS 7.1 on a formatted hard drive (FAT16 or FAT32): (1) Start the computer from your Windows 98 startup disk and at the prompt run the command SYS C: to make the hard disk bootable. (2) Create a new directory named C:\DOS and copy to it the DOS commands from your Windows 98 command folder (C:\Windows\Command)

MS-DOS and Windows command line format comman

  1. Page 1 of 2 - Trying to install windows 98SE - posted in Windows 95/98/ME: I have an old toshiba satellite pro 430cds. I have successfully created a boot disk, using a windows 98 emulator on my.
  2. This example uses an 8GB hard disk image with a single FAT32 formatted partition. Technically the FAT32 filesystem is capable of supporting partitions up to 2TB, but the generic IDE driver in Windows 98 cannot handle volumes greater than 128GB. Larger partition sizes may be possible with 3rd party drivers but are not covered here
  3. Windows 95 r2 and Windows 98 include a boot floppy. Windows 98: The Windows 98 boot floppy includes several popular CD-ROM drivers, including some SCSI controllers and a driver which appears to work with most IDE CD-ROMs. Update: It is possible to boot off the Windows 98 CD-ROM. To my surprise, the boot disk and the boot image on the CD-ROM are.
  4. Installing Windows 98. Use a Win98 Startup disk (with CD support) to boot your computer. Insert your Win98 CD into the CD Rom drive. At the A: prompt type X:\Win98\Setup.exe where X: is your CD.
  5. Windows 98 boot disk format command. Windows 98 boot disk usb. Windows 98 boot disk commands. Windows 98 boot disk download. By Charles Poole I computer keyboard image by forca from Fotolia.com Windows operating system começa with a welcome screen where you must enter the password for the account you want to use. If you enter your password.
  6. The Startup Disk tab on Windows 98's Add/Remove Programs Properties dialog box featured a button labeled Create Disk. Clicking this button allowed you to create a bootable Startup Disk that you could use to start a Windows 98 system in the event of a problem that prevented a normal boot sequence
  7. I'm wanting to set up a new Windows 98 build and seem to have a hard time finding a good Windows 98 case/tower to start with. I wanted to use the Lian-Li PC-62 case but can't find it anywhere for sale online. I'm curious if I was to gut say, a Dell Optiplex 170L tower (For Windows XP), but keep the floppy drive and CD drive, would I still be.

Creating a Bootable Floppy Manuall

STEP 4: Select the Drive to Format. Formatting a drive. Now type ' select disk (disk number) ' as shown above. Specify the drive number which needs to be formatted MS-DOS 5/6 + Windows 95/98/ME FDISK does NOT recognize hard disks larger than 137 GB (48-bit LBA function). Windows 98/98 SE/ME [MS-DOS 7.10/8.00] FDISK canNOT create partitions larger than 512 GB. More FDISK details: MSKB: How to Use Fdisk and Format Tools to (Re)Partition a Hard Disk. Undocumented FDISK. FDISK Information Top 20 XP Questions And Answers. Make A Quick Boot Diskette #1. Using System Restore #1 #2 Flashing Your BIOS. Take Ownership Of A File Or Folder #1. Delete Undeletable Files And Folders #1 #2. Address Common Stop Messages #1 #2. Remove Windows Messenger #1. Startups, Processes, And Services #1 #2 Windows 98 is an operating system developed by Microsoft as part of its Windows 9x family of Microsoft Windows operating systems. It is the successor to Windows 95, and was released to manufacturing on May 15, 1998, and generally to retail on June 25, 1998. It is the second 16-bit and 32-bit monolithic product with the boot stage based on MS-DOS.. Windows 98 is a heavily web-integrated. Here is a MS-DOS 6.22 boot disk image with a generic CD-ROM driver. This should provide real mode CD-ROM support for most IDE CD-ROMs. This image can be used when formatting and re-installing MS-DOS 6.22, Win95, and Win95A

Create a boot disk as a USB drive. These steps are for Windows 8.1 users which can only use USB flash drives to create the boot/startup disk. You need a USB drive with at least 256 MB in size, blank. To create the disk, follow these steps: Boot into Windows 8.1. Press the Windows + R key to open the Charm Bar Do to license restrictions, the Ultimate Boot CD does not contain boot disks of commercial software eg. MS-DOS, Windows, Ghost etc. It also does not contain boot disks specific to your environment eg. network drivers, SCSI drivers etc. Finally, it may not always contain the most up-to-date virus definitions A: corresponds to the first floppy drive in 86Box settings, B: is the second one. Here I have set the first floppy drive to 3.5 1.44 MB in 86Box settings and configured the floppy drive A: to correspond. All that's left to do is save the settings. Press Esc until you see the following screen and then press Enter

Bad Command or File Name When Installing 98 - Dell Communit

Tip: After you enter into Windows Setup screen, you can also select the language to install, time and currency format, keyboard or input method, and click Next.Then click Repair your computer at the bottom-left corner to enter into Recovery Environment in Windows 10, and then click Troubleshoot -> Advanced options -> Command Prompt, to boot to Command Prompt Windows 10 Step 5: Reboot off the same Windows 95 boot disk. Step 6: Type format c: (but do not include the /s command). Step 7: Reboot one more time off the same Windows 95 boot disk Hello. I forgot my BIOS Password and I don't like to remove CMOS Battery. My Laptop have Windows 7 and want to reinstall it, Windows can provide any command for tell my Laptop for boot from CD? Thank you. · HI! To boot from CD you don't need to goto BIOS. In most models to boot from CD need to push to F9 button during starting. For some models it's. To create virtual hard disk, you need an image file that resemble a real hard disk, which consist of MBR and partition data. If the image file only contains partition data, you need to patch it with MBR to create disk image. GRUB for DOS has taken this into consideration

Download Puran Disk Check. 2. Run Check Disk From a Bootable Rescue Media. Another way to run Check Disk if you are unable to boot into Windows is loading a Windows based rescue disk. There are several disks around that make use of the Windows Preinstall Environment (Windows PE) where you can load a cutdown version of Windows from a CD/DVD or. 5.1. fdisk usage fdisk is started by typing (as root) fdisk device at the command prompt.device might be something like /dev/hda or /dev/sda (see Section 2.1.1).The basic fdisk commands you need are: p print the partition table . n create a new partition . d delete a partition . q quit without saving changes . w write the new partition table and exit . Changes you make to the partition table.

Video: WinWorld: Microsoft Windows Boot Disk 98 S

The partition ur trying to format is in NTFS format and so ur Win 98 bootable does not recognize the drive. You cant run a Windows XP setup in DOS mode. The boot sequence should be like this. Old MB 1st boot - CD-Rom 2nd boot - HDD 0. New MB 1st boot - CD/DVD 0 2nd boot - HDD Insert a disk into your floppy disk drive and run Windows Explorer. Right-click the Drive A icon and choose Format. In the Format dialog. box, select the check box labeled 'Create an MS-DOS.

Windows 98 System Files - win98boot

  1. 1. Put the Windows Windows 7 installation disc in the disc drive, and then start the computer. 2. Press any key when the message indicating Press any key to boot from CD or DVD . appears. 3. Select a language, time, currency, and a keyboard or another input method. Then click Next. 4
  2. Windows 98 was released in both 32 and 16-bit versions just like the older windows 95 and it was based on the Disk Operating System (DOS) which was a Command-Line operating system developed by Microsoft
  3. Just do the following: Go to BIOS or UEFI to change the boot sequence so that the operating system boots from CD, DVD or USB disc (depending on your installation disk media). Insert a Windows installation disk into the DVD drive (or connect it to a USB port)
  4. The Windows XP startupdisk allows computers without a bootable CD-ROM to perform a new installation of the operating system. The Windows XP startup disk will automatically load the correct drivers to gain access to the CD-ROM drive and start a new..
  5. Disquette de boot Windows 98 dont les post sur le réseau et le formatage XP sont repris au Menu. Cette disquette est une disquette de boot pour Windows 98 à laquelle il a rajouté Free Fdisk, la prise en charge U.S.B. et un lecteur NTFS permettant par exemple de recopier des fichiers NTFS vers une partition DOS ou une disquette..

Windows - DOS Command

  1. This assumes that you have a good working boot disk. And that you wish to start with a freshly formatted hard drive. Click here to go to the boot disk page. Click here to learn more about Partitions and FDISK. Click here to find out more about FAT32. From Microsoft How to Install Windows 98 on a Computer with No Operating System Want to download a bootdisk image with generic CD-ROM support
  2. Does any know what the command to extract AND create a boot disk. WITH cd rom support... using ONLY a windows 98 cd and a command prompt? my friends bios is TOO old to boot to the cd rom
  3. How to Create a Windows 95/98/Me Startup Disk. Insert a floppy diskette which does not contain any data you need to save. Click Start, point to Settings, and then click Control Panel. Double-click Add/Remove Programs. In the Add/Remove Programs dialog box, click the Startup Disk tab. Follow the on-screen instructions to create the startup disk

Partitioning, Formatting and Reinstalling in Windows 9

Dos Startup Disk Windows 10 - geppe

Boot Disks: How/Why to Make a Win 95/98 Boot Dis

  1. The fix for a Windows 95 or Windows 98 CD-ROM drive not working usually involves deleting a registry key and disabling config.sys. The first step is to get rid of that pesky 16-bit driver. Windows doesn't need it, even to run DOS titles, and today, if you want to play DOS games you probably have a nice dedicated DOS machine for that
  2. 5) Obtain a Copy of a Boot Disk. A boot disk is a recovery method. It also provides basic functionality for setting up hard drives. The boot disk we will be using for our install is a Windows 98 SE version, it sports DOS 7. Get your Boot Disk → Boot Disk Website
  3. Hitting that toggle also increases the number of options in the Create a bootable disk using menu. By default, MS-DOS will be shown. Step 4 - Make USB bootable. Click the disk icon to the right of Create a bootable disk using:, and selected the win98_bootdisk.iso you downloaded in Step 2
  4. istrator snap-in. Volumes can be created on both GPT and MBR disks, and both kinds of disks can be mixed in the same dynamic disk group
  5. Step 1: If you have a Win-Me startup disk, copy the Sys.com file to it from the Windows\Command folder. If you don't have the disk, go to Control Panel and click on Add-Remove Programs, the Startup Disk tab and Create Disk button. When the startup disk is finished, add the Sys.com file
  6. g Grub2, Grub4Dos, Grub2 File Manager, Secure Boot installations on USBs as well as hard drives. DOS 5.0 - 6.22 Floppy Boot Disk Image is the original DOS 5.0, 6.0, 6.21, and 6.22 boot disks with IDE CDrom drivers included and even 5.25 disk image for DOS 6.22. Windows 2000 Floppy Boot Disk Image is the.

Get IT Done: Troubleshoot Windows 98 startup problems with

Windows 98 boot disk with Utilities (DOS/Win98) Windows 98 boot disk with autoexec.bat, config.sys, delpart.exe, format, fdisk and other utilities. 774 KB: Windows 98 boot disk with CD-ROM support (DOS/Win98) Same as the Windows 98 boot disk with utilities, but with CD-ROM support from Oak Technologies The creation of Bart's Network Boot Disk is very easy and all it takes is just a command line and a few confirmation screens. 1. Follow steps 1-5 from NetBootDisk to create a virtual floppy drive. 2. Download BFD and extract the ZIP file. 3. Open command prompt and change to the extracted BFD folder To fix the disk checking on every boot up, I followed other topics here and did the: right click on drive>properties>tools>check>repair/restart. I completed these steps twice. I still get the message on boot up, and Windows still wants me to repair it when I scan the drive. So the repair tool isn't doing anything for me

Hello, I was wondering if anyone can help me figure out a way to install windows 98SE on a computer that isn't recognizing the CD I'm putting in. I How to Use USB Drives With Windows 98: When I was a kid, my first experience with computers was with Windows 98. I remember doing things like playing solitaire and making my grandparents gift cards in Print Shop. Times have changed a lot since the times of W98 and one of those changes i Windows 95's OEM Service Release 2, through Windows 98 Second Edition, added support for the FAT32 file system, and was the last version that could boot to the command line from a hard disk. The VER internal command reports the Windows version 4.00.1111, 4.10.1998, or 4.10.2222 depending on the version of Windows, while applications through the. Use ALL FDISK.EXE command line switches with CAUTION, ONLY from native/real MS-DOS mode, NOT from a Windows DOS box/session, even full screen! FDISK /FPRMT [Windows 95B OSR2 + MS-DOS 7.10 and above ONLY] FDISK /FPRMT bypasses the FDISK startup screen, but enables interactive FAT16/FAT32 support. This can be used to force FDISK to create FAT32. 1) a good floppy BOOT DISK (to boot up a computer), plus 2) a Disk Editor (to enter/change Partition Table data) and 3) FDISK.exe on it (it's much easier to use the FDISK /MBR command to place a copy of Microsoft's MBR code in the sector than entering it one byte at a time manually

117 - Install Windows 98se/Me From an Iso File on An

  1. To prepare a bootable USB / floppy from MS-DOS, Windows 95/98/ME/XP, put a blank 3.5-inch USB / floppy in the USB / floppy drive (drive A:) and follow the appropriate instructions below. Windows 95/98 MS-DOS or Command Prompt Mode. On the screen, type the format command as follows: FORMAT A: /S. Follow on-screen messages until process is.
  2. Type format c: into the command prompt and press the ENTER key. Follow the instruction to format the virtual hard disk. Shut down and restart the virtual machine, booting to the virtual Win98 boot disk
  3. imum antall nødvendige filer for å starte opp en datamaskin
  4. utes since it will format the hard drive and configure. Once it's finished you'll need to reboot. From now on you can always boot from Hard Disk since the OS has been installed

To open the Command Prompt, type cmd on the Windows 8 Start screen and click Command Prompt. Type the following into Command Prompt and press Enter to run the disk check : chkdsk /f E: Replace the letter E with the letter corresponding to your external hard drive Select NEC floppy disk drive (or similar) Install this driver. This driver enabled 720k disk handling on my Fuji Floppy drive (Note, starting from Windows 7, the FORMAT command will no longer accept the /F:720 parameter - You need to instead specify number of tracks and sectors yourself like. FORMAT A: /T:80 /N:9 Add switches to modify the format process. There are several switches that you can add to the end of the format command to modify what happens. For example, to perform a Quick Format on the A: drive, you would type format /q a:. /fs:filesystem - Replace filesystem with FAT, FAT32, exFAT, NTFS, or UDF depending on your needs. /v:label - Replace label fi with the label you want to give the disk DiskPart is a legacy command-line tool designed to manage drives, partitions, volumes, and virtual disks using Command Prompt, which usually works better than other Windows 10 tools, such as Disk. Boot your computer using a Window 98 boot disk. You may need to add Smartdrv.sys to the floppy, to use on older systems. You can find Smartdrv.sys in the TOOLS, OLDDOS directory of a Windows 98.

How To Create A Windows Start Up Disk - pctechguide

To boot famous disk diagnostic tool MHDD from USB thumb drive you'll need: 1. Not supprisingly thumb drive you are willing to use as bootable (and are ready to format it). 2. A copy of Virtual Floppy Drive application. 3. Last version of MHDD, self-extracting floppy image. 4. A copy of HP USB Disk Storage Format Tool This is an install tech-recipe for Windows XP. It describes how to install Windows XP from the hard drive. Requirements: Windows 98SE Boot Diskette w/smartdrv.ex If you want to use the entire hard disk for one or more logical drives, click Next. To leave some empty space on the drive to format under a different file system or for use by another operating system, adjust the partition size and click Next (see Figure 3.16).. Figure 3.16 Configuring a 1.2GB drive as an extended partition with Windows XP's New Partition Wizard How to use disk partition cmd in Windows 11/10. Steps to create a partition in Windows 11/10 using command prompt. Warning: Do not use the Diskpart until a full backup. Step 1: You can use the two methods mentioned above to open the command prompt or Run window. Step 2: Enter Diskpart

Booting in MS-DOS Computerworl

This document outlines the steps of how to install Windows XP in a computer with a Win9x operating system.Basically, it shows how to backup stuff, delete the previous OS and install XP without formatting the hard disk.. For those geeks who just want to install XP straight from MS-DOS without the necessary preparations (or if you have done it), go here To create a boot disk for Windows 2000, you'll need a copy of the first boot disk that ships with Windows 2000. Follow these steps: Open a Command Prompt window and enter the command: DISKCOPY A: A: When the DISKCOPY program asks for the source disk, insert the Windows 2000 Startup Disk number 1. Allow DISKCOPY to read the disk.; The program will ask for a destination disk

Booting DOS from a USB Drive - OnLogic Blo

Creating bootable USB without any software in Windows 10 is the cleanest and easiest way to make a bootable USB without errors. Just follow the steps below to create bootable USB drive with the. I thought that if you formatted a floppy under win XP using the FAT File System and then copied the Win 98 boot files: command.com, io.sys, and msdos.sys, it should work. I guess that bit about the boot record pointing to the NTLDR file not letting a Win XP formatted floppy act as a DOS boot disk even with Win9x boot files on it is the answer

Seagate DiscWizard Starter Edition 10